Husqvarna HUV 4421 4421-G/GX/GXL - Manual (Page 17)

Controls and Indicators
PH0901-123456
BC54679
SERIAL NUMBER
4
1 2 3
1400
Figure 5 Serial Number Decal
CONTROLS AND INDICATORS
See General Warnings on page 11.
WARNING
• Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and
operating procedures.
• Do not tamper with the high idle speed setting on the diesel vehicle. Doing so will void the warranty,
as well as damage the engine and other components, and could result in property damage, personal
injury, or death due to unsafe speeds.
• Do not shift the Forward/Reverse handle while the vehicle is in motion.
• Engine must be at idle before shifting the Forward/Reverse handle. Failure to do so may result in
injury to inattentive passengers and (or) damage to the vehicle.
• To avoid unintentionally starting or rolling the vehicle, set the park brake, place the Forward/Reverse
handle in the NEUTRAL position, turn the key switch to the OFF position, and remove the key when
leaving the vehicle.
HUV 4421 Owner’s Manual Page 15