Husqvarna HUV 4421 4421-G/GX/GXL - Manual (Page 20)

Controls and Indicators
BRAKE PEDAL
The brake pedal (2) is located to the immediate left of the accelerator pedal (Figure 6 and Figure 7). To slow or stop
the vehicle, press the brake pedal.
PARK BRAKE
The park brake pedal (3) is located to the left of the brake pedal (Figure 6 and Figure 7). To engage the park brake,
first apply pressure to the brake pedal, then firmly press the park brake pedal until it latches into place. To disengage
the park brake, pull the park brake release handle (4) (Figure 8). See following WARNING.
WARNING
• The park brake has multiple locking positions and should be firmly locked to prevent the vehicle
from rolling.
4
191
Figure 8 Park Brake Release
STEERING ADJUSTMENT LOCK
The steering wheel position is adjustable. To adjust the steering wheel position, press down on the steering adjustment
lock lever (5), then move the steering wheel to the desired position (Figure 6 and Figure 7). While holding the steering
wheel in the desired position, pull up on the steering adjustment lock lever to firmly lock the steering column in
position. See following WARNING.
WARNING
• Ensure that the steering wheel lock is fully engaged before operating the vehicle.
Page 18 HUV 4421 Owner’s Manual