HONDA Outboard Motor BF2D - Manual (Page 36)

34
MOORING, BEACHING,
LAUNCHING
OPERATION
STEERING
FRICTION BOLT
FRONT
CARRYING
HANDLE 75°
REAR CARRYING
HANDLE
To raise the outboard motor out of
the water while the boat is moored, or
for maximum clearance when
beaching or launching, tilt the
outboard motor to the 75° position.
Stop the engine before tilting the
outboard motor. The 75° position is
not an operating position.
Stop the engine and turn the fuel
valve lever off.
Close the fuel tank vent by turning
the vent knob clockwise.
With the motor in the forward
position, tilt the outboard motor
using the front and rear carrying
handles on the engine cover. The
spring-loaded tilt lever will
automatically move into position
and hold the outboard motor when
it reaches approximately 75°.
Adjust the steering friction bolt to
keep the motor from moving.
1.
2.
3.
4.
04/03/11 15:42:17 31ZW6601_035