Propeller replacement, Servicing your outboard motor – HONDA Outboard Motor BF2D User Manual
Page 52
50
Propeller Replacement
SERVICING YOUR OUTBOARD MOTOR
COTTER PIN
PROPELLER
COTTER PIN
SHEAR PIN
Removal
Installation
Use a genuine Honda stainless steel
cotter pin and bend the pin ends as
shown. A non-stainless steel cotter
pin can deteriorate if used in
saltwater.
Before replacing the propeller,
remove the clip from the engine stop
switch to prevent any possibility of
the engine being started while you
are working with the propeller.
The propeller blades may have sharp
edges, so wear heavy gloves to
protect your hands.
Remove the cotter pin, then remove
the propeller and shear pin.
Install the propeller in the reverse
order of removal.
Operating the outboard motor at
higher altitudes will reduce available
power. This may require decreasing
the propeller pitch to maintain correct
engine RPM.
Spare shear pins and cotter pins are
provided on the engine undercase (p.
04/03/11 15:45:06 31ZW6601_051