Technical data, Eu declaration of conformity, Only applies to europe) – Husqvarna 225 HBV User Manual

Page 27

Advertising
background image

English –

25

TECHNICAL DATA

Engine
Cylinder volume, cm

3

:

Cylinder bore, mm:
Stroke, mm:
Idling speed, rpm:
Max. speed – blowing, rpm:
Max. speed – vacuuming, rpm:
Max. engine output to ISO 8893:
Catalytic converter muffler
Ignition system
Manufacturer/type of ignition system:
Spark plug:
Electrode gap, mm:
Fuel and lubrication system
Manufacturer/type of carburetor:
Fuel tank volume, liters:
Weight
Weight, without fuel but with blower tube
and standard nozzle fitted, kg:
Noise levels
Equivalent noise pressure level at
operator’s ear. Weighted value for 50%
idling and 50% full throttle to ISO 7182,
dB(A):
Equivalent sound power level, measured to
ISO 9207, dB(A):
Vibration levels
Vibration levels at the handle, measured
according to ISO 7505, m/s

2

Idling speed, front/rear handle:
Max. speed, front/rear handle:
Fan
Type:
Max. air velocity, m/s (km/h):
Air volume using a standard nozzle, m

3

/h:

Air volume without nozzle and tube, m

3

/h:

Air volume with vacuuming device, m

3

/h:

25,4
34
28
3.000
8.200
7.400
0.9 kW/9000 rpm
Yes

Walbro MB/CD
Champion RCJ 7Y
0.5

Walbro/WT
0.4

5.1

92

102

2.6
4.2

Radial fan
57 (206)
425
665
560

EU declaration of conformity

(Only applies to Europe)

(Directive 89/392/EEC, Annex II, A)

We, Husqvarna AB, S-561 82 Huskvarna, Sweden, tel. +46 36-146500, declare under sole responsibility that the
blower Husqvarna 225HBV from the serial numbers of 1997 and onwards (the year is clearly stated in plain text on
the type plate with subsequent serial number), is in conformity with the following standards or other normative
documents following the provisions in the COUNCIL’S DIRECTIVES:
-

of June 14 1989 “relating to machinery” 89/392/EEC and applicable supplements.

-

of May 3 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.

The following standards have been applied: EN292-2.

SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, S-754 50 Uppsala, Sweden, has carried out voluntary type
approval for Husqvarna AB. The certificate is numbered: SEC/97/440.

Huskvarna October 21, 1997

Bo Andréasson, Development manager.

Advertising