Panasonic GD76 - Manual (Page 18)

Basic Operation
Switching the Phone On/Off
To switch the phone on or off Z+Hold E
When the phone is switched on a greeting will be displayed and then the
phone will go into Idle.
Making a Call
Ensure that the phone is switched on, the network operator logo is
displayed and the signal strength meter shows network coverage is available
in the current area.
1 Enter area code and phone number
2 Z D
International Dialling
Using the automatic international access code (+)
you will be able to dial international numbers
without having to know the code for the
international exchange.
If the international number is known then it can be
entered in the normal fashion followed by the area
code and phone number.
1 From Idle Z+ Hold 0 until “+” is
displayed
2 Use e to cycle through the abbreviated
international names Z Q to choose the required code
3 Enter area code and phone number
4 Z D
Note: Many countries / regions include an initial “0” in the area code. This
should, in most cases, be omitted when dialling international numbers. If
you have difficulties making international calls, contact your Service
Provider.
8
Basic Operation
Ok
List:
UK
UKR
URY