Panasonic GD76 - Manual (Page 42)

Text Messages
It is possible to receive, display, edit and/or send text messages of up to 459
characters, (Dependant on the language being used) to mobile phones on
the same network or any network that has a roaming agreement. Messages
will be sent as one message, but will be received as (up to) three messages.
(Dependant on the recipients phone parameters).
Setting the Phone for Short Text Messages
Before a message can be sent, it is necessary to enter the Message Centre
number into Parameters (the Service Provider will supply the Message
Centre number).
The Message Centre number may have been preprogrammed on the SIM.
Setting the Message Centre Number
From Idle Z Q, select Messages > Parameters >
Message Centre Z Q
Enter message centre number in international dial format – see
“International Dialling” page 8 .
Creating a Text Message
1 From Idle Z Q, select Messages >
Create Z Q
Create a text message (up to 459 characters) -
see “Text Entry” page 58
The Character menu is not available in “Numeric
mode” and may only be accessed by Z Q e when using T9. To
access the character menu in other text modes Z + Hold 1- 0
Z B to exit the character menu
2 Use g to navigate through the message and add or delete text
3 Z Q twice
The user may be prompted to send the message, if the message is not to
be sent Z C , the message will be stored.
4 Z Q and enter the destination phone number (or recall a
number from the Phonebook) - see “Retrieve a Number” page 14
Z Q twice
32
Text Messages
Hello
Menu