Homelite UT44172 - Manual (Page 8)

Page 6 — English
SyMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the product better and safer.
SyMBOL NAME EXPLANATION
Safety Alert Symbol Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce the risk of injury, user must read and understand op-
erator’s manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Wet Conditions Alert Do not expose to rain or use in damp locations.
No Hands
Sharp cutting blades. To prevent serious injury, do not touch
cutting blades.
Risk of Electrocution DANGER! Risk of electrocution!
Electric Shock
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Gloves
Wear non-slip, heavy-duty protective gloves when handling
the blades.
Hot Surface
To reduce the risk of injury or damage, avoid contact with any
hot surface.
Recycle Symbol
This product uses nickel- cadmium (Ni-Cd) batteries. Local, state,
or federal laws may prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
hrs Hours Time
Class II Construction Double-insulated construction