Cruise control – HONDA 2009 Element User Manual

Page 200

Advertising
background image

Cruise control may not hold the set
speed when you are going up and
down hills. If your speed increases
going down a hill, use the brakes to
slow down. This will cancel cruise
control. To resume the set speed,
press the RES/ACCEL button. The
CRUISE CONTROL indicator on the
instrument panel will come back on.

When climbing a steep hill, the
automatic transmission may
downshift to hold the set speed.

Changing the Set Speed
You can increase the set cruising
speed in any of these ways:

Press and hold the RES/ACCEL
button. When you reach the
desired cruising speed, release the
button.

To increase your speed in very
small amounts, tap the RES/
ACCEL button. Each time you do
this, the vehicle will speed up
about 1 mph (1.6 km/h).

Push on the accelerator pedal.
Accelerate to the desired cruising
speed, then press the SET/
DECEL button.

You can decrease the set cruising
speed in any of these ways:

NOTE: If you need to decrease your
speed quickly, use the brakes as you
normally would.

Press and hold the SET/DECEL
button. Release the button when
you reach the desired speed.

To slow down in very small
amounts, tap the SET/DECEL
button. Each time you do this,
your vehicle will slow down about
1 mph (1.6 km/h).

Tap the brake or clutch pedal
lightly with your foot. The CRUISE
CONTROL indicator on the
instrument panel will go out. When
the vehicle slows to the desired
speed, press the SET/DECEL
button.

Even with the cruise control turned
on, you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The vehicle
will return to the set cruising speed.

RES/ACCEL
BUTTON

CANCEL
BUTTON

SET/DECEL
BUTTON

Cruise Control

194

Advertising