Hunter Fan 81021 - Manual (Page 10)

43041-01 01/31/2008
10
Connect wiring from the motor to the wiring cover plate. reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
Turn on the power source. secure the motor by tightening the 2 screws.
Connect 4” duct and vent to the outside. Tape joints.
if ducting does not fit securely, an adapter may need
to be purchased.
install the wiring cover plate. Make sure all wiring
connections are inside the box or under the
wiring cover plate.
B20
B22
B24
B22
B25
B21
F
G
H
I
H