Hunter Fan 81021 - Manual (Page 12)

43041-01 01/31/2008
12
1/8" Bit
5/8
1/2
5/8
1/2
C13 C14
C15 C16
C17
C18
Drill a hole in the center of each outline. insert screws, leaving space between the screw head
and the joist. screws are not provided.
attach the rails onto the screws. Tighten screws.
position the correct depth mark at the bottom edge of the joist
based on the thickness of your sheetrock.
Mark position of screws by using holes as a template.