HP 1080p - Manual (Page 29)

16 HP MediaSmart HDTV User Guide
Connecting high-definition equipment by
using component cables
There are two sets of high-definition Component
connectors you can use:
1: Y, Pb, and Pr, and Audio L and R
2: Y, Pb, and Pr, and Audio L and R
1 Connect component video cables and left-right
audio cables to the Component connectors on the
rear of the TV.
2 Connect the cables to the DVD player.
3 Turn on the DVD player and start play.
4 Connect power to the TV; see “Connecting power
to the TV” on page 22.
5 Turn on the TV; see “Turning the TV On and Off”
on page 25.
6 Select the input source to view, as well as the
Aspect, and other options; see “Operating the TV”
on page 33.
Connecting standard-definition
equipment by using S-Video or Video
cables
Connect a standard-definition DVD player, VCR, game
console, camcorder, or other AV equipment by using
S-Vid or Video (composite video) connectors. These
connectors do not pass high-definition signals.
1 Connect an S-Video cable, or a composite video
cable, by using the AV Input connector sets on the
rear of the TV:
1: S-Vid or Video, and Audio L and R
2: S-Vid or Video, and Audio L and R
S-Vid connection
Video connection
!
The S-Vid and Video connectors share the
Audio connectors in the set. Do not connect
video cables to both the S-Vid and Video
connectors in a set.