Hitachi MK-96RD617-08 - Manual (Page 73)

Using the Performance Manager GUI 4-31
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User’s Guide
Figure 4-14 Port Tab in the Server Priority Manager Window
The Port tab displays the following:
• Current Control Status can display either Port Control or WWN
Control.
– If Port Control is displayed, the system is controlled by the upper
limits and threshold specified in the Port tab.
– If WWN Control is displayed, the system is controlled by the upper
limits and threshold specified in the WWN tab.
– If No Control is displayed, the system performance is not controlled by
Server Priority Manager.
Tip: If WWN Control is displayed when the Port tab is active, click Apply
to switch control so that Port Control is displayed.
Tip: To return the control status to No Control, specify Prio. for attributes
of all the ports and then click Apply.
• The list near the upper right corner of the Server Priority Manager
window allows you to narrow ports in the list:
– If All is selected, all the ports appear in the list.
– If Prioritize is selected, only the prioritized ports appear in the list.
– If Non-Prioritize is selected, only the non-prioritized ports appear in
the list.