HP 7400C Series User Manual
Page 99
Advertising
Troubleshooting usage and maintaining
To install the new ADF window
1
Position the four Z-shaped hooks of the ADF window into the four
holes on the bottom of the ADF.
2
Rotate the ADF window back until it contacts the bottom of
the ADF.
3
Check that the long, pointed tab is on the inside of the ADF.
4
Beginning with the Z-shaped hook closest to the long, pointed tab,
push each of the Z-shaped hooks toward the back of the ADF.
5
Verify that the long, pointed tab is on the inside of the ADF.
6
Reconnect the ADF cable to its port on the scanner.
Advertising