Changing the flash setting – HP C500 User Manual
Page 14
Adjusting the Camera Settings
HP PhotoSmart C500 Digital Camera User’s Guide
43
Changing the Flash Setting
To change the flash setting:
1.
Turn the camera on and turn the camera mode dial to Rec.
2. Press the Flash button repeatedly until the flash setting you want
displays on the status LCD. The flash setting is effective for Still
and Timelapse photos, and remains until you change it, even if
you turn the camera off.
Note:
You cannot use the flash for Burst photos; the flash button is inactive.
The flash settings are indicated by icons on the status LCD:
Note:
The flash needs to recharge between photos. When the red light next to the viewfinder is off, you can
take another flash photo.
Auto
The camera determines the need for a flash based on lighting
conditions. This is the default setting.
On
The flash will be used, regardless of the lighting conditions.
Off
The flash will not be used, regardless of the lighting conditions.
Auto with red-eye
reduction
The flash will be used if needed. Red-eye reduction minimizes the
occurrence of red-eye in photos of people or animals by flashing
twice.
Flash button