30 chapter 2 control panel enww – HP CM6049F MFP User Manual

Page 46

Advertising
background image

Menu item

Sub-menu item

Sub-menu item

Values and Description

Default IP

Specify the IP address to default to when the print
server is unable to obtain an IP address from the
network during a forced TCP/IP reconfiguration (for
example, when manually configured to use BootP or
DHCP).

Auto IP

: A link-local IP address 169.254.x.x is set.

Legacy

: The address 192.0.0.192 is set, consistent

with older HP Jetdirect devices.

DHCP Release

This menu appears if

Config Method

was set to

DHCP

and a DHCP lease for the print server exists.

No

(default): The current DHCP lease is saved.

Yes

: The current DHCP lease and the leased IP

address are released.

DHCP Renew

This menu appears if

Config Method

was set to

DHCP

and a DHCP lease for the print server exists.

No

(default): The print server does not request to renew

the DHCP lease.

Yes

: The print server requests to renew the current

DHCP lease.

Primary DNS

Specify the IP address (n.n.n.n) of a Primary DNS
Server.

Secondary DNS

Specify the IP address (n.n.n.n) of a Secondary
Domain Name System (DNS) Server.

IPV6 Settings

Enable

Use this item to enable or disable IPv6 operation on the
print server.

Off

: IPv6 is disabled.

On

(default): IPv6 is enabled.

Address

Manual Settings: Use this item to manually set IPv6
addresses on the print server.

Enable

: Select this item and choose

On

to enable

manual configuration, or

Off

to disable manual

configuration.

Address

: Use this item to type a 32 hexadecimal digit

IPv6 node address that uses the colon hexadecimal
syntax.

DHCPV6 Policy

Router Specified

: The stateful auto-configuration

method to be used by the print server is determined by
a router. The router specifies whether the print server
obtains its address, its configuration information, or
both from a DHCPv6 server.

Router Unavailable

: If a router is not available, the print

server should attempt to obtain its stateful
configuration from a DHCPv6 server.

Always

: Whether or not a router is available, the print

server always attempts to obtain its stateful
configuration from a DHCPv6 server.

Table 2-11

Jetdirect menus (continued)

30

Chapter 2 Control panel

ENWW

Advertising
This manual is related to the following products: