haier GDE/GDG450AW - Manual (Page 25)

24
English
The following sounds are normal during the operation of the dryer.
• Tumbling sound: this is normal as the heavy wet clothes in the dryer are
continuously being tossed around.
• Air rushing noise: this happens as the dryer drum spins and the air is rushing
through the dryer drum.
Tips
• For best drying results, clean the lint filter before or after every use.
• Do not overload the dryer. The appropriate load is 1/3 to 1/2 of the drum
volume.
• Balance the dryer load evenly throughout the dryer for the best result.
• Drying time depends on many variables: load size, type of fabric and
moisture in it, heat and moisture in the room, electric voltage, length of the
exhaust duct, etc.
• To eliminate guessing and to conserve energy, it is recommend for certain
clothes to dry on an auto-drying setting.
• Always follow the fabric care instructions supplied by the garment manufacturer.
• Lint filter needs to be cleaned before
or after each use for your unit to
operate at optimum efficiency. The
filter can be removed by pulling on
the tabs located on the inside of the
dryer door. The filter may be washed
or vacuumed. Remove the excess
water from the filter by gently shaking
the filter. This will remove dust and
particles trapped in the filter. Lint built up in screen will restrict airflows, which
causes longer drying times. After cleaning, slide the filter back in place. Do not
use your dryer without the lint filter.
• Do not use any type of spray cleaner when cleaning the interior.
• Hazardous fumes or electric shock could occur. If dryer drum becomes stained,
clean the drum with damp cloth. Remove any residue before drying next load.
• Clean the cabinet with mild soap and water. Do not use harsh or abrasive
cleaners, as this could damage the dryer.
• Clean the duct and the vent on a regular basis to avoid clogging which could
affect the efficiency of the dryer.
NORMAL OPERATING SOUNDS
CARE AND CLEANING GUIDE
Lint Filter