HP 1600 - Manual (Page 52)

3. On the Sharing tab, click the Share this printer option button, and then type a name for the product
in the Share Name field. Click OK.
NOTE The printer Share Name is limited to 8 characters.
4. Click the Ports tab. Click to clear the Enable bidirectional support check box, and then click OK.
Setting up the client computers
When you have set up the host computer to share your HP Color LaserJet 1600 printer, you must also
configure the client computers. Perform the following steps at all the other network computers that will
use the HP Color LaserJet 1600 printer.
Setting up client computers running Microsoft Windows 98 SE, Microsoft Windows Me, or
Microsoft Windows 2000
1. Click Start, click Settings, and then click Printers.
2. Double-click the Add Printer icon to open the Add Printer wizard.
3. Click Next to start the wizard.
4. Click the Network Printer option button, and then click Next.
5. Type in the path and share name of the HP Color LaserJet 1600 printer to which you want to
connect.
NOTE Or you can click Browse and navigate to find the HP Color LaserJet 1600 printer
to which you want to connect.
6. Click Next.
7. Click Yes or No when asked if you want to use this printer as your default printer for Microsoft
Windows-based programs, and then click Next.
8. Click Finish to complete the installation and close the Add Printer wizard.
NOTE You might need the product software CD to complete the print–driver installations.
Setting up client computers running Microsoft Windows XP or Microsoft Windows Server 2003
1. Click Start, and then click Printers and Faxes.
2. In the column to the left, under Printer Tasks, click Add a printer to open the Add Printer wizard.
3. Click Next to start the wizard.
38 Chapter 3 Software installation for Microsoft Windows ENWW
Sof
tware inst
allat
ion for
Microso
ft Wind
ows