HP SAS DL360 - Manual (Page 42)

42 HP ProLiant DL360 Generation 4p Server (SAS Model) User Guide
CAUTION: To prevent thermal instability and damage to the
server, do not separate the processor from the heatsink. The processor,
heatsink, and retaining clip make up a single assembly.
CAUTION: To prevent possible server malfunction and
damage to the equipment, do not mix processors of different types.
To install the component:
1. Power down the server ("Powering down the server" on page 24 ).
2. Extend the server from the rack, if applicable ("Extending the server from the
rack" on page 25 ).
3. Remove the access panel ("Removing the access panel" on page 26 ).
4. Release the processor retaining clips and processor locking lever.