HP SAS DL360 - Manual (Page 44)

44 HP ProLiant DL360 Generation 4p Server (SAS Model) User Guide
7. Install the processor assembly and close the processor locking lever and
processor retaining clips.
8. Install the access panel ("Extending the server from the rack" on page 25 ,
"Installing the access panel" on page 26 ).
To remove the processor, reverse the installation procedure.
Memory options
You can expand server memory by installing PC2-3200 DDR2 SDRAM DIMMs.
The system supports up to six ECC Registered DDR2 SDRAM DIMMs.
NOTE: The Advanced Memory Protection option in RBSU provides
additional memory protection beyond Advanced ECC. By default, the
server is set to Advanced ECC Support. Refer to "ROM-Based Setup
Utility ("HP ROM-Based Setup Utility" on page
65 )," on the
Documentation CD, for more information.
The server supports two types of memory configurations:
• Standard memory configuration for maximum performance with up to 12 GB
of active memory (six 2-GB memory modules)
• Online spare memory configuration for maximum availability with up to
6 GB of active memory while simultaneously supporting up to 6 GB of
online spare memory