HP SAS DL360 - Manual (Page 47)

Hardware options installation 47
6. Install the DIMM.
7. If removed, reinstall the half-length expansion board ("Installing an
expansion board" on page 55 ).
8. Install the access panel ("Extending the server from the rack" on page 25 ,
"Installing the access panel" on page 26 ).
9. If you are installing DIMMs in an online spare configuration, use RBSU to
configure this feature ("Configuring online spare memory" on page 67 ).
Hard drive options
Removing a Hard Drive Blank (on page 48 )
SAS and SATA Hard Drive Guidelines (on page 48 )
Installing a SAS or SATA Hot-Plug Hard Drive (on page 49 )