HP SAS DL360 - Manual (Page 53)

Hardware options installation 53
6. Use the strain relief clip from the server hardware kit to secure the power
cord, as illustrated.
7. Route the power cords through the cable management solution.
8. Connect the power cord to the power source.
9. Be sure that the power supply LED is green ("Rear panel LEDs and buttons"
on page 11 ).
10. Be sure that the front panel external health LED is green ("Front panel LEDs
and buttons" on page 8 ).
Expansion board options
PCI expansion slot definitions (on page 54 )
Expansion board (on page 54 )
Installing an expansion board (on page 55 )
Installing a PCI Express riser board (on page 56 )