Horizon Fitness LIMITED SERIES LS780T - Manual (Page 7)

12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
SET SCREW (I)
12 mm
Qty: 4
BOLT (J)
100 mm
Qty: 2 SPRING WASHER (K)
15.4 mm
Qty: 2
ARC WASHER (L)
18 mm
Qty: 2
ASSEMBLY STEP 
SET SCREWS (I)
HANDLEBARS
CONSOLE
SET SCREW (I)
12 mm
Qty: 4 BOLT (J)
100 mm
Qty: 2 SPRING WASHER (K)
15.4 mm
Qty: 2 ARC WASHER (L)
18 mm
Qty: 2
HARDWARE BAG  CONTENTS :
A Open HARDWARE BAG .
B Attach LEFT HANDLEBAR to CONSOLE using 2 SCREWS (I) .
C Repeat on other side.
ASSEMBLY STEP  (CONTINUED)
YOU’RE FINISHED!
POWER SWITCH CIRCUIT BREAKER
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'ON' position, so that
the switch is lit. You will hear a beep
and the console will light up.
CONSOLE MAST
BOLT (J)
SPRING WASHER (K)
ARC WASHER (L)
HANDLEBAR
HARDWARE BAG  CONTENTS :
Continue using HARDWARE BAG .
Fasten LEFT HANDLEBAR to CONSOLE MAST using 1 BOLT (J), 1 SPRING WASHER (K) and 1
ARC WASHER (L).
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
Repeat on other side.
A
B
C
LS780T_Rev.1.3.indd 12-13 6/2/08 4:40:35 PM