Husqvarna 11 C - Manual (Page 31)

English –
29
8009-406
8009-409
8009-408
8009-407
8009-410
MAINTENANCE
8. Pull the handle outwards. Secure the handle in
the air filter cover and close the cover by
pressing it inwards.
Replacing the air filter
If the engine seems to lack power or goes irregu-
larly the reason may be that the air filter is clogged.
It is therefore important to replace the air filter at
regular intervals (see ”Maintenance \ Maintenance
Schedule” for correct service interval)
The air filter is replaced as follows:
1. Raise the engine cover.
2. Pull up the handle on the air filter cover, unhook
and turn towards the engine.
3. Remove the air filter cover.
4. Lift out the air filter cartridge from the fan
housing.
Replace the paper filter if it is clogged with dirt.
7. Align the tabs on the cover with the slits in the
housing and replace the air filter cover.
5. Carefully lift the precleaner out of the fan
housing. Carefully clean the fan housing so that
dirt does not fall down into the carburetor.
6. nsert a new precleaner and air filter cartridge in
the fan housing.
IMPORTANT INFORMATION
Do not use compressed air to clean the
paper filter.
Filters should not be oiled. They should
be assembled dry.