Harbor Freight Tools 8" Portable Ventilator 97762 - Manual (Page 6)

Page 6 For technical questions, please call 1-800-444-3353. Item 97762
Symbology
Double Insulated
ETL Standards Association
V~
Volts Alternating Current
A
Amperes
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved safety
goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power
cord to appropriate outlet.
Specifications
Electrical Rating 120V~ / 60Hz / 1.4A
Model# STFJ-20N
Air Flow
1590 CFM - High
1380 CFM - Low
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical
outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 7.
1. Set the Ventilator on a flat, solid surface.
2. Ensure the Inlet and Outlet grills are
firmly and securely in place.
3. Ensure that the switch is in the “OFF”
position before plugging the unit in.
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-
lit. The work area must not allow access by
children or pets to prevent distraction and injury.
2. There must not be drapes, paper or other forms
of cloth nearby that could be pulled into the inlet
part of the ventilator obstructing air flow.
3. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
General Operating Instructions
1. Turn the fan on by moving the switch
either to the right, or the left. The positions
are noted next to the switch.
WARNING! Do not reposition the fan while in use.
2. To prevent accidents, turn off the ventilator and
disconnect its power supply after use. Clean, then
store the tool indoors out of children’s reach.
REV 12c
SAFETY
MAINTENANCE
OPERA
TION