Harbor Freight Tools 8" Portable Ventilator 97762 - Manual (Page 7)

Page 7 For technical questions, please call 1-800-444-3353. Item 97762
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical
outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. WARNING! If the supply cord of this
tool is damaged, it must be replaced only
by a qualified service technician.
Part Description Qty
1 Safety Grill 2
2 Retaining Nut 1
3 Washer 1
4 Aluminum Fan 1
5 Motor 1
Part Description Qty
6 Mounting Bracket 3
7 Handle 1
8 On/Off Switch (2-Speed) 1
9 Case 1
10 Power Cord 1
Parts List and Diagram
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
SAFETY
MAINTENANCE
OPERA
TION