Havis-Shields Kwik-Kit KK-100-03 - Manual (Page 12)

KK-XXX-03_INST_10-07 12
Loosely bolt Rear Bulkhead
Doorframe (at the door hinge) to
Bench/Wall assemblies using ¼”
x ¾” carriage bolts, washers and
serrated nuts
Item #6 to #2
Place the 3
rd
Compartment
Doorframe assembly.
Item #11
Loosely attach Doorframe to Center
divider using #10 x 3/8” flat head
machine screws and nylock nuts
Item #6
to #5
Position between Driver and
Passenger-side Bench/Wall
assemblies
Item #6
Place Rear Bulkhead
Doorframe into vehicle
Item #6
Align 3
rd
Compartment Doorframe to
3
rd
Compartment Ceiling and loosely
attach ¼” x ¾” hex head bolts, washers
and serrated nuts.
Item #12 to #11
Press doorframe to align with holes in
Passenger-side Bench/Wall
assembly.
Item #11
to #9
Note: It is recommended to put
edge molding on the OEM door
opening on the passenger side to
avoid damaging the Kwik kit
door.