Hayes Microcomputer Products PC Card - Manual (Page 46)

DIVA T/A PC Card Reference Guide 46
Profile Commands
This section describes the Profile commands.
Command Description
AT&F Use Factory Settings in Current Profile:
Restores and loads all settings in the
current profile with the original factory
settings. Previously configured ISDN
commands, stored telephone numbers, and
the rate adaption control values are
retained; all other settings are lost.
AT>F Use Factory Settings in All Profiles:
Restores all stored profiles and the current
profile to the original factory settings.
Reverts the powerup profile to number 0.
Use when you need to reset the card to its
original factory settings.
Warning: All previous user-defined
settings are lost.
AT>FC Reset Current Profile and Telephone
Numbers. Resets the current profile and
telephone numbers to the default factory
settings.
AT&Wn Save Settings as Profile n: Writes storable
parameters of current profile in memory as
stored profile n. Use when you are satisfied
with your current configuration settings
and want to save them to a specific stored
profile n.
AT&Yn Set Powerup Profile: Designates stored
profile n as the powerup profile. Use to
load your desired stored profile the next
time your DIVA T/A is powered.