Safety symbols & decals, Key to symbols – Husqvarna 544 93 62-01 User Manual
Page 3
SpeedMill 3
SAFETY SYMBOLS & DECALS
2 –
English
KEY TO SYMBOLS
Key to symbols
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Please read the operator’s manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
•
Protective helmet
•
Hearing protection
•
Protective goggles or a visor
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
petrol fumes and exhaust fumes. Always
provide for good ventilation.
WARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, dry grass etc.
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
Run position.
Stop, with the return spring to the operating
position.
Stop, in the fixed position.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Operator must wear eye protection!
Operator must wear hearing protection!
Operator must wear respiratory
protection!
(Reference OSHA 29CFR 1910.95,
1910.133-138)
Operator must wear head protection such as
a hard hat!
Operator must wear protective footwear such
as safety shoes or safety boots!
The operator must wear protective cloth-
ing appropriate to the work he is doing.
Never wear loose clothing or jewelry. Keep
long hair tied back. Keep your hair, cloth-
ing, and gloves away from the rotating tool!
The working area must be completely clear,
well lit and all safety hazards removed.
Any persons not involved in the work, should
leave the area.
FOR INFORMATION ON DECALS FOR
THE SPEEDMILL, SEE THE SPARE
PARTS LIST SECTION OF THIS DOCU-
MENT.
FOR INFORMATION ON DECALS FOR
THE K 750 POWER CUTTER, SEE THE
SPARE PARTS LIST FOR THE K 750.