Handspring 90 - Manual (Page 75)

Chapter 5 Page 75
5. Wait for the Beam Status dialog box to indicate that the transfer is complete before you
continue working on your handheld.
To beam an application:
1. Press Option and then press Menu to access the Applications Launcher.
2. Press Menu .
3. Under App, select Beam (/B).
4. Tap the Beam From pick list and indicate whether the application you want to beam is located
on your handheld or an expansion card.
5. Tap the application you want to transfer.
Note: Some applications are copy-protected and cannot be beamed. These are listed with
a lock icon next to them.
6. Tap Beam.
7. When the Beam Status dialog box appears, point the IR port directly at the IR port of the
receiving handheld.
8. Wait for the Beam Status dialog box to indicate that the transfer is complete before you
continue working on your handheld.
To receive beamed information:
1. Turn on your handheld.
2. Point the IR port directly at the IR port of the transmitting handheld to open the Beam Status
dialog box.
3. When the Beam dialog box appears, select a category for the entry.
Tip: If you do not select a category the entry is placed in the Unfiled category.
4. Hold Option and press Return for Yes.