Paper handling menu, Hp toner cartridges – HP 4100 mfp User Manual
Page 40
38 Chapter 3 – Control panel and control panel menus
EN
Paper Handling menu
The Paper Handling menu options allow you to specify how the input trays are
configured.
1
Tray 1 mode: allows you to select the mode of operation for multipurpose Tray 1.
Choices are:
• First
• Cassette
2
Tray 1 size: allows you to select the size of the paper present in Tray 1. Choices are:
• Any
• Custom
• Letter
• Legal
• Executive
3
Tray 1 type: sets the media type in Tray 1 (displayed only if the Tray 1 mode setting
is Cassette). Choices are:
• Plain
• Preprinted
• Letterhead
• Transparency
• Prepunched
• Labels
4
Tray <n> size: configures the media size for Trays 2, 3, and 4.
5
Tray <n> type: configures the media type for Trays 2, 3, and 4.
6
Tray <n> custom: sets a custom media size for Trays 2, 3, and 4. Media can be
specified by:
• unit of measure: millimeters or inches
• x and y dimensions: width and length of the custom paper in Tray <n> stated in
the selected unit of measure
7
Fuser modes: sets the type of media to be used and then establishes the fuser
mode, or fuser temperature, appropriate for the chosen media type.