HP Transcend Traffix Manager - Manual (Page 106)

106 C HAPTER 12: R EPORT T YPES
■
“From US at Country level to UK at City level” tells you which cities in
the U.K. communicated most with the U.S.
■
“From US at Device level to UK at Device level” tells you the busiest
connections between individual devices in the U.S. and U.K., such as
server1 to pc-42 or pc48 to ukServer.
The following are examples of reports on the default Type and Network
grouping. See
Chapter 4 , “Grouping Network Devices in the Map” for
more information about the default groupings.
■
“From 123.0.0.0 at Network level to IP at Network level” tells you
which IP networks had the busiest connections with the 123.0.0.0
network. As 123.0.0.0 is a network, the connections are not broken
down within the network.
■
“From server1 at Device level to 123.0.0.0 at Device level” tells you
which machines in the 123.0.0.0 network exchanged the most traffic
with server1.
Table 12 Top N Connections Report Charts
Report
Section Chart Title
Description
1.1 Top
Connections By
Octets A stacked bar chart containing the top N connections as
measured by total octets between the two end points,
broken down by protocol.
Protocol
Distribution Of
Top Groups A pie chart showing the top 10 protocols seen within all
of the N connections. If more than 10 protocols are
seen, the remainder are grouped as
other .
Connection
History A multiple line chart showing the history of the total
octets for each of the N connections over the report
period.
2 Detail For Top
Connections
2.1 Protocol
Distribution Of
Connection By
Octets A pie chart showing the total octets within the
connection, broken down by protocol.
Protocol
Distribution By
Octets With
Packets Overlaid A stacked bar chart showing the total octets within the
connection over the report time period, broken down by
protocol. The left hand axis refers to the octet totals.
The right hand axis refers to the packet totals which is
shown as a line.
(continued)