HP h2200 Series - Manual (Page 17)

1–10 User’s Guide
Getting to Know Your iPAQ Pocket PC
3. Release the Application Buttons and stylus.
✎
To verify a full reset, press the Power button. If the iPAQ Pocket
PC has been fully reset, it does not power on.
4. Reactivate the battery by:
❏ Connecting the iPAQ Pocket PC to AC power
or
❏ Pressing the Reset button with the stylus
Aligning the Screen
When the iPAQ Pocket PC is turned on for the first time, you are
guided through a screen alignment process. You must realign
your screen if:
■ The Pocket PC does not respond accurately to your taps.
■ You perform a full reset of your Pocket PC.
To realign the iPAQ Pocket PC screen:
1. From the Start menu, tap Settings > System tab > Screen
icon.
2. Tap the Align Screen button.
✎
To use an alternate path to the same destination without tapping
on the screen, push down and hold exactly in the center of the
5-Way Navigation button, then press Application Button 1
(Calendar).
3. Tap the cross-hair object at each location. Be precise when
tapping the cross-hair object.
4. Tap OK.
293146-001HamrUG.book Page 10 Friday, April 11, 2003 2:08 PM