Harbor Freight Tools 99741 - Manual (Page 8)

For technical questions, please call 1-800-444-3353;
troubleshooting section at end of manual.
SKU 99741 PAGE 8
grOundIng
tO PreVent
electrIc ShOck
and death FrOm
IncOrrect grOundIng
WIre cOnnectIOn:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the power cord plug
provided with the equipment.
do not use the equipment if
the power cord or plug is
damaged. If damaged, have it
repaired by a service facility
before use. If the plug will not
fit the outlet, have a proper
outlet installed by a qualified
electrician.
Equipment marked “Double Insu- 1.
lated” does not require grounding.
They have a special double insulation
system which satisfies OSHA require-
ments and complies with the applica-
ble standards of Underwriters Labo-
ratories, Inc., the Canadian Standard
Association, and the National Electri-
cal Code.
Double insulated equipment may be
2.
used in either of the 120 volt outlets
shown in the preceding illustration.
(See Outlets for 2-Prong Plug.)
to allow gFcI unit to function properly,
extenSIOn cOrdS muSt nOt be
uSed with this pressure washer.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
a
Amperes
n0 xxxx/min.
No Load Revolutions per Minute
(RPM)