Figure 2-54, Buzzer out setup menu, Configuring e-mail notification – Honeywell HREP4 User Manual
Page 61
HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B
61
08/10
Figure 2-54
BUZZER OUT Setup Menu
These settings determine the behavior and actions that will trigger the internal buzzer.
2. Configure the following behavior settings:
3. Configure the action settings:
Note
Remember to select APPLY and click
to save all settings before exiting
these menus.
Configuring E-Mail Notification
1. Click E-MAIL NOTIFICATION on the left side of the EVENT/SENSOR window.
The E-MAIL NOTIFICATION setup menu appears.
OPERATION
Enable/disable the internal buzzer.
HDD EVENT
Determines whether a hard drive event triggers the buzzer.
MODE
Select from TRANSPARENT (the buzzer sounds only when the
trigger criteria are present) or LATCHED (the buzzer sounds for
a set period of time after a trigger).
DURATION
In LATCHED mode, this is the time that the alarm output
remains active after it has been triggered.
ALARM
Configure whether the alarm inputs trigger the buzzer.
VIDEO LOSS
Configure whether video loss on any of the selected channels
triggers the buzzer.
MOTION
Configure whether motion detection on any of the selected
channel triggers the buzzer.