Harbor Freight Tools TORCH KIT 94903 - Manual (Page 7)

SKU 94903 For technical questions please call 1-800-444-3353 Page 7
MAinTenAnce
Refilling the Butane Canister:
WARNING:
Do not use any other fuel other than butane which is specifically de-
signed for this type of torch. use of any other fuel may result in severe per-
sonal injury.
Be sure the tool is turned off and is cool.
Hold the tool in an upside down position, with the end of the handle facing up.
Insert and press down the filling tip of the butane canister.
Stop refilling once the butane starts to overflow.
Allow the refilled tool to stabilize for a few minutes before resuming work.
cleaning and Storing
The tip should be cleaned periodically during use with a damp sponge.
After use, allow the torch and all accessories to cool down to room temperature
before maintenance.
Wipe the tool down with a damp cloth to remove any grease, flux or dirt.
Be sure the Gas “ON/OFF” Switch Lock Button is in the OFF position.
Store the tool and its accessories in the Storage Case provided.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
using The Soldering iron Stand:
Soldering Iron Stand
The torch comes with a stand that can be pulled out to allow you to rest it on a flat
surface. See photo below.
REV 07j