Hoover S3627 - Manual (Page 7)

Suction regulator
The suction regulator is located on
the hand grip and is used to
increase or decrease suction for
various cleaning tasks.
Set suction regulator to MINIMUM,
MEDIUM or MAXIMUM suction by
rotating plastic ring until raised
plastic indicator on dial is directly
under desired setting.
Cleaning toots
A variety of useful cleaning tools is included with your cleaner. These tools
and their uses are shown below. The wail/floor brush is available at a nominal
cost from your Authorized Hoover Dealer, a Hoover Factory Service Center or
by writing to The Hoover Company, North Canton, Ohio 44720.
1. Crevice tool may be used for
radiators, dresser drawers, spaces
between kitchen equipment.
2. Furniture nozzle may be used
for upholstered furniture, draperies,
tapestries, mattresses, clothing,
automobile interiors and carpeted
stairs.
3. Dustlng brush may be used for
carved furniture, table tops, books,
lamps, lighting fixtures, Venetian
blinds, baseboards, shutters and
registers.
l 4. Wail/floor brush may be used
for walls and very irregular hard
surface floors such as brick and
slate.
Available at additional cost.
6