HP 9100 series - Manual (Page 237)

ENWW Mode menus 235
E-mail mode menu
Menu item Description
<TO? =DIST.LIST> Use this area to specify an e-mail address for the e-mail message. The
connection can be network, USB, or parallel.
See Sending scans as e-mail attachments for information about the ways that
you can specify e-mail address.
Subj: Digital
sen... Use this area to type text for the SUBJECT line of the e-mail message. The
maximum length for the SUBJECT line is 60 characters).
The SUBJECT line might be preconfigured. You can change the text, unless the
all-in-one has been set up so that the SUBJECT text cannot be changed. See
Configuring the defaults for e-mail message format (network connection) for
more information.
From: ... Use this area to type text for the FROM line of the e-mail message.
The FROM line might be preconfigured. You can change the text, unless the
all-in-one has been set up so that the FROM text cannot be changed. See
Configuring the defaults for e-mail message format (network connection) for
more information.
Glass
or
ADF
Indicates whether the ADF or the scanner glass is the source for the scan.
Options for scanning include the following choices:
z 1-SIDED
z 2-SIDED
You can also reach the double-sided options by pressing 2-S IDED OPTIONS on the
control panel.
Type Selects the document type:
Selects the document type and format:
z BLACK/TIFF
Use this option when the original contains only text and you want to be able
to edit the text in the resulting document. The output format is Tagged
Information File Format (TIFF).
z TEXT/PDF
Use this option when the original contains only text. The output format is
Adobe Portable Document Format (PDF).
z MIXED/PDF
Use this option when the original contains both text and photographs. The
output format is PDF.
z PHOTO/JPEG
Use this option when the original contains only photographs. The output
format is Joint Photographic Experts Group (JPEG).
z MIXED/JPEG
Use this option when the original contains both text and photographs. The
output format is JPEG.
You can also reach the document type option by pressing T RAY /T YPE on the
control panel.