HP 9100 series - Manual (Page 80)

78 7 - Using memory cards ENWW
The all-in-one features four slots, one slot for each type of memory card that is supported.
1 SmartMedia memory card
2 CompactFlash (CF) memory card
3 Secure Digital or MultiMedia Card (MMC) memory card
4 Memory Stick memory card
After you insert the memory card, three things happen:
z READING MEMORY CARD... appears on the control panel-display.
z The light next to the card slot blinks green while the card is being read.
z The P HOTO button on the control panel blinks.
If you insert a memory card backwards, the light next to the card slot blinks amber, and a
message such as
Card is in backwards or Card is not fully inserted appears on the
control-panel display.
When the all-in-one is finished reading the card, another message appears that shows the
number of photos that were found on the memory card.
To remove a memory card
To remove a memory card, simply pull the memory card out of the slot.
1
4
2
3