Printer menu – HP 9100 series User Manual
Page 246
244 A - Control-panel mode and setup menus
ENWW
PRINTER menu
Menu item
Description
Configure printing
Opens the CONFIGURE PRINTING submenu, which is used to configure the
default for the following options:
z
Copies
(default number of copies to print)
z
Default paper size
z
Default paper type
z
Default print quality
z
Duplex
z
Override A4 or Letter
(print an A4-size job on letter-size paper when no
A4 paper is loaded, or print a letter-size job on A4-size paper when no
letter-size paper is loaded)
Configure tray
Opens the CONFIGURE TRAY submenu, which is used to configure the default
for the following options:
z
Tray 1 size
z
Tray 1 paper type
z
Tray 2 size
z
Tray 2 paper type
z
Default tray
(the tray that the all-in-one uses if a tray is not selected in the
printer driver)
z
Automatic media-type sense
(when turned on, the all-in-one detects the
type of media and automatically selects the media type and the most suitable
print quality for the job; see
Setting the automatic paper-type sensor
for more
information)
Configure PCL
Opens the CONFIGURE PCL submenu, which is used to configure the following
settings for PCL when you are using the PCL 5c or PCL 6 printer driver:
z
Font number
z
Font pitch
z
Point size
z
Symbol set
z
ISE fonts
z
Append CR to LF
(determines whether a carriage return is appended to each
line feed that is encountered in backward-compatible PCL jobs)
Print PostScript
errors
Determines whether a PS error page prints.
z
ON
A PS error page prints when PS errors occur.
z
OFF
A PS error page never prints.
Unattended
printing
Sets the printer to take one of the following actions during large print jobs (after
every 100 pages):
z
ON
The all-in-one pauses so that you can clear the output tray.
z
OFF
Printing continues.
Personality
Sets the default personality to one of the following options:
z
Automatic switching
z
PCL 5
z
PCL 6
z
PS