HP 9100 series - Manual (Page 69)

ENWW Using special copy features 67
Shifting the image to increase the margin for binding
Use the margin shift feature to shift the image to the left or right to increase the margin for
binding.
Note You can also adjust the reduction/enlargement percentage in this mode by typing a number
on the keypad or keyboard. Each unit of adjustment is 6.35 mm (0.25 inch). Therefore, the
adjustable range is -12.7 to 12.7 mm (-0.5 to 0.5 inch).
To shift the image to increase the margin for binding
1 Load the original on the scanner glass or in the ADF. See Loading the originals for more
information.
2 If required, type your PIN on the keypad or keyboard.
3 Press C OPY .
4 With the cursor next to Normal copy , press (select).
5 Press - or + to select Margin Shift , and then press (select).
6 Press - or + to shift the margin, and then press (select).
7 Press S TART .
Making a poster
When you use the poster feature, the all-in-one divides your original into sections and then
enlarges the sections onto letter or A4 paper so that you can assemble them into a poster.
Note Only the scanner glass can be used to make a poster.