Harbor Freight Tools 98871 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. SKU 98871
S
AFE
ty
S
ER
VI
c
E
B
ASI
c W
EL
d
Ing
W
EL
d
Ing
tIPS
S
E
t
UP
SAVE thIS MAnUAL
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
IMPORtAnt SAFEty
InFORMAtIOn
In this manual, on the labeling, and
all other information provided with
this product:
this is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
dAngER indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.
WARnIng indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.
cAUtIOn, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
nOtIcE is used to
address practices not
related to personal injury.
cAUtIOn, without the
safety alert symbol, is
used to address practices not
related to personal injury.
general Safety Warnings
WARnIng Read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Save all warnings and instructions
for future reference.
Work area safety 1.
Keep work area clean and well lit. a.
Cluttered or dark areas invite accidents.
do not operate welders in explosive b.
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Welders create sparks which may ignite
the dust or fumes.
Keep children and bystanders away c.
while operating a welder. Distractions
can cause you to lose control.
Electrical safety 2.
Welder plugs must match the outlet. a.
never modify the plug in any way.
do not use any adapter plugs with
grounded welders.
Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with grounded b.
surfaces such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your
body is grounded.
do not expose welders to rain or wet c.
conditions. Water entering a welder will
increase the risk of electric shock.