Hitachi DZ-MV350A - Manual (Page 66)

66
E
nglis
h
QR34962
RECORDING IMAGE FROM AV DEVICE
1
Set the input source on the
DVD video camera/
recorder to “LINE (L IN)”.
Switch the input referring
to “Input Source” on
page 88.
Choose “S LINE” to input S-VIDEO signal.
(Only for DZ-MV380A)
2
Turn on the connected device, and start
playback.
The picture will appear on the LCD screen or
viewfinder of this DVD video camera/recorder.
3
Press the REC button.
Recording will start on this DVD video camera/
recorder.
The operation of this line-input recording is the
same as for recording movie.
Note :
• The recorded contents can be played back in the same
manner as when playing back camera images recorded
on this DVD video camera/recorder.
• Still images can also be recorded on DVD-RAM disc or
card. See “Switching External Input Recording Method
(PHOTO Input)” on page 88 for details, and “Recording
Stills” on page 53 for how to record still images.
• The “Input Source” setting will return to “CAMERA”
whenever DVD video camera/recorder is turned off.
• Recording of most images is prohibited by the copy-
guard signal to protect the copyright, except for images
recorded on camcorders for personal enjoyment. “COPY
PROTECTED” appears in these images: They cannot be
recorded on this DVD video camera/recorder.
Typical copyright protected images include those of DVD
video, LD, recorded video tapes, some parts of digital
satellite broadcasts, etc.
• If a video signal that cannot be read by this DVD video
camera/recorder is present - even in images recorded on
camcorder for personal enjoyment without copy-guard
signal - the input image may not be recorded normally.
• If the input signal is interrupted by switching the channel
on TV or switching the signal using video selector, normal
recording cannot be performed.
8 : 0 0 AM
9 / 3 0 / 2 0 0 3
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
L IN