HP 2045 - Manual (Page 21)

Sample Print
15
3
IIII
Press [Yes].
The remaining sets are printed.
Note
❒ Press [No] to cancel printing.
❒ When printing is completed, the
stored file will be deleted.
❒ If printing is stopped by press-
ing [Job Reset] after printing has
started, the file will be deleted.
❒ If there is a print job outstand-
ing, this will be printed before
the sample print job.
Deleting a Sample Print File
If you are not satisfied with the sam-
ple printout, you can delete the sam-
ple print file, revise it and print it
again until the settings are suitable.
AAAA
Press the
{{{{Printer}}}} key to display
the Printer screen.
BBBB
Press [View Sample Print jobs].
A list of sample print files stored in
the machine is displayed.
CCCC
Select the file you want to delete
by pressing on it.
Note
❒ Press [U U U UPrev.] or [T T T TNext] to
scroll through the list.
❒ Only one file can be selected at a
time.
DDDD
Press [Delete].
The delete confirmation screen
will be displayed.
EEEE
Press [Yes] to delete the file.
After the file has been deleted, the
screen will return to the file list
screen.
Note
❒ If you do not want to delete the
file, press [No].
Checking the Error Log
If a file could not be stored, you can
check the error log on the control pan-
el.
Limitation
❒ The error log displays only the 20
most recent entries. If the power is
turned off, the log is deleted.
AAAA
Press the
{{{{Printer}}}} key to display
the Printer screen.
BBBB
Press [View Sample Print jobs].
CCCC
Press [Show Error Log].
A list of the error log is displayed.