HP 2045 - Manual (Page 46)

Printer Features
40
5
❖ ❖ ❖ ❖ Memory Usage
You can select the amount of mem-
ory used in Font Priority or Frame
Priority, according to paper size or
resolution.
• Font Priority
This setting uses memory for
registering fonts.
• Frame Priority
This setting uses frame memory
for high speed printing.
Note
❒ Default: Frame Priority
❖ ❖ ❖ ❖ Duplex
You can select to have print on
both sides of each page.
• Off
• Short Edge Bind
• Long Edge Bind
Note
❒ Default: Off
❖ ❖ ❖ ❖ Copies
You can set the number of sets of
prints. This setting is disabled if
the number of pages to print has
been specified with the printer
driver or a command.
• 1 to 999 by 1
Note
❒ Default: 1
❖ ❖ ❖ ❖ Edge Smoothing
You can set this to enable Edge
Smoothing.
• On
• Off
Note
❒ Default: On
❒ If Toner Saving is set to On,
Edge Smoothing is ignored
even if it is set to On.
❖ ❖ ❖ ❖ Toner Saving
You can this to enable Toner Sav-
ing.
• On
• Off
Note
❒ Default: Off
❖ ❖ ❖ ❖ Printer Language
Normally, the machine should be
set to Auto. If the printer language
cannot be detected in Auto, the
language specified by Default
Printer Language is selected.
• Auto
• PCL
• PS
Note
❒ Default: Auto
❒ PS appears only when the op-
tional PostScript 3 board is in-
stalled in the machine.
❖ ❖ ❖ ❖ Sub Paper Size
You can enable the Auto Substitute
Paper Size (A4
↔LT) feature.
• Auto
• Off
Note
❒ Default: Off
❖ ❖ ❖ ❖ Page Size
You can select the default paper
size.
• 11
Ч 17
• 8
/Ч 14
• 8
/Ч 11
• 5
/ Ч 8/
• 7 1 /
4
Ч10/
• 8
Ч13
• 8
/Ч13