Hamilton Beach 840164201 - Manual (Page 3)

5 4
Parts and Features *on selected models only
The iron is equipped with a position sensor. If iron is left motion-
less it will turn off automatically and cool to room temperature.
To restart, move iron and allow it to reheat on heel position:
— iron will reheat to the previously selected setting
— iron will lose memory when turned off ( O ) or unplugged
The iron turns off automatically when left in these positions:
Iron Position Motionless Time
Resting on soleplate 30 seconds
Resting on either side 30 seconds
Resting on heel 10 minutes
Position Sensing Feature
Retractable
Cord*
Cord Release
Button*
Spray and
Blast Buttons
Adjustable
Steam
Water Tank
Fill Cover
Soleplate Water Tank Self-Clean
Button
Power Indicator
Lights (see inset)
Temperature
Settings
Button
(see inset)
Heel Rest
The light is . . . This means . . .
RED and Solid Power OFF ( O ). This light will
remain on until iron is unplugged.
RED and Blinking Iron was heating/reheating and went
to OFF ( O ). Iron will reheat when
moved.
GREEN and Solid Iron is heated and ready for ironing.
GREEN and Blinking Iron is preheating/heating.
840164201 ENv03.qxd 10/11/07 11:15 AM Page 4