Hamilton Beach 840164201 User Manual
Page 5
9
8
Temperature Settings
To Iron
Off
Nylon
Acrylic
Silk
Polyester
Rayon
Wool
Cotton
Linen
Ironing Instructions
Steam
Setting
Dry iron on the reverse side of the fabric.
Dry iron on the reverse side of the fabric.
Dry iron on the reverse side of the fabric.
Iron with fabric still damp.
Iron on the reverse side of fabric.
Steam iron on the reverse side of fabric.
Iron while still damp using steam
and/or spray.
Iron on reverse side of fabric while still
damp.
Vertical Steam
1. Follow Steps 1 through 4 in
“To Steam Iron.”
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches away from garment. Press and
release the Steam Button to steam out wrinkles. Do not
press Steam Button more than once every 3 seconds.
4. To turn iron off, turn Temperature Settings to OFF ( O ).
Unplug iron.
5. Empty water from the iron following directions in “Care and
Cleaning.”
NOTICE: Do not allow the hot soleplate to touch delicate
garments.
Features
(continued)
Care and Cleaning
Iron
1. The Water Tank of your iron should be emptied after each
use. Turn Temperature Settings to OFF ( O ). Unplug the
iron and open Water Tank Fill Cover. Turn iron upside down
until Water Tank Opening is parallel with sink. Water will
run out of water tank opening.
2. After iron has completely cooled, store in an upright posi-
tion. NOTICE: Do not store iron laying flat on soleplate.
840164201 ENv03.qxd 10/11/07 11:15 AM Page 8