HP 8517B - Manual (Page 42)

HP 8517B S-Parameter Test Set Manual 3-4
Figure 3-3 RF and IF Switching with Two Test Sets
Table 3-3 RF and IF Switch Settings in Figure 3-3, Above
New ADDRESS of
Test Set
1, 2
1. Not all system connections are illustrated.
2. In dual source configurations, the second source may be multiplexed in a similar manner. If only one
dual source test set is used, the second source may be connected directly to the appropriate test
set.
Test Set Number
Selected Coaxial Switch Port Selected
20 Number 1 Port 1
21 Number 2 Port 2