HP 2011S - Manual (Page 27)

Icon Main Menu Options Sub-menu Options Description
Auto-Adjustment Automatically adjust the screen image.
NOTE: This item can only be used with
a VGA input signal.
Clock Minimizes any vertical bars or strips
visible on the screen background.
Adjusting the Clock also changes the
horizontal screen image (VGA input
only).
Clock Phase Adjusts the focus of the display. This
adjustment allows you to remove
horizontal noise, and clear or sharpen
the image of characters (VGA input
only).
Horizontal Position Adjusts the position of the screen image
left and right.
Vertical Position Adjusts the position of the screen image
up and down.
Custom Scaling Selects the method for formatting
information displayed on the monitor.
Select:
● Fill to Screen — image fills the
entire screen and might look
distorted or elongated because of
non-proportional scaling of height
and width.
● Fill to Aspect Ratio — image is
sized to fit the screen and maintains
proportional image.
Sharpness Adjusts the screen image to look sharper
or softer.
OverDrive (select models) Turns OverDrive on or off. The factory
default is Off.
Dynamic Contrast Ratio Sets the DCR setting on or off. The factory
default setting is off. DCR automatically
adjusts the balance between white and
black levels to provide you with an
optimal image.
OSD Control Adjusts the position of the OSD menu on
the screen.
Horizontal OSD Position Changes the viewing position of the OSD
menu to the left or right area of the
screen.
Vertical OSD Position Changes the viewing position of the OSD
menu to the top or bottom area of the
screen.
ENWW Using the On-Screen Display (OSD) 21