HP 2011S - Manual (Page 29)

Icon Main Menu Options Sub-menu Options Description
Bezel Power LED Turns the light (LED) in the Power button
on and off. When set to off, the light will
remain off at all times.
Sleep Timer Provides the timer-adjustment menu
options:
● Set Current Time — Sets the current
time in hours and minutes.
● Set Sleep Time — Sets the time you
want to place the monitor in sleep
mode.
● Set On Time — Sets the time you
want the monitor to wake up from
sleep mode.
● Timer — Sets the Sleep Timer
feature on or off; the default setting
is Off.
● Sleep Now — Immediately sets the
monitor to enter sleep mode.
Language Selects the language in which the OSD
menu is displayed. The factory default is
English.
Information Selects and displays important
information about the monitor.
Current Settings Provides the current input video mode.
Recommended Settings Provides the recommended resolution
mode and refresh rate for the monitor.
Serial Number Reports the serial number of the monitor.
The serial number is needed if contacting
HP technical support.
FW Version Reports the firmware version of the
monitor.
Backlight Hours Reports the total hours of backlight
operation.
Service Support For service support, go to: www.hp.com/
support .
Factory Reset Returns settings to factory defaults.
Source Control Selects the video input signal. The factory
default by priority is DVI, VGA, and then
HDMI.
DVI (select models) Selects DVI as the video input signal.
HDMI (select models) Selects HDMI as the video input signal.
VGA Selects VGA as the video input signal.
ENWW Using the On-Screen Display (OSD) 23